![]() ![]() If not, arm can float and cause ignition timing to vary. When reassembling, ensure pick-up assembly arm is correctly installed on pin. Disassembly & ReassemblyÄisassembly procedure is not available from manufacturer. CAUTION:Although similar in appearance, components of HEI/EST distributors are NOT interchangeable. Pull up slightly on distributor until rotor stops turning counterclockwise and again note position of rotor. Remove distributor hold-down bolt and hold-down clamp. Remove distributor cap and move out of the way. On all models, disconnect electrical connectors to distributor. See CHARGE AIR COOLER (4.3L) under TURBOCHARGER. On 4.3L Turbo PFI models, drain and remove charge air cooler radiator. On TBI models, remove air cleaner assembly. ![]() It will be much easier to remove the distributor specially if you can not see, don't be scared just remember which way the rotor is pointing, and the base of the distributor you can mark on the engine and distributor before removalÄisconnect negative battery terminal. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |